AP Group

The Unified Profile AP Group Screen displays all configured AP (Access Point) Groups and used to create, edit, assign, and delete AP Groups.

Creating an AP Group

Click on the Create icon. Configure the Group as described below, then click on the Create button. After creating the AP Group, assign the group to a controller.

• Group Name- User-configured name for the group.
• Access Auth Profiles - The Access Authentication Profile(s) associated with the group. Selecting an Access Auth Profile will allow for association of the AP Group to the correct Virtual AP Profile inside the Access Auth Profile. Select an Access Auth Profile from the drop-down menu or click on the Add icon to go to the Access Auth Profile Screen and create a new one.

Editing an AP Group

Select the group in the AP Group Screen and click on the Edit icon to bring up the Edit AP Group Screen. Edit the fields as described above then click on the Save button to save the changes to the server. Note that you cannot edit the group name.

Assigning an AP Group

Select a group and click on the Apply To Wireless Controllers button. The AP Group Assignments Screen appears. Click on the Devices ADD button and select a controller(s). The controller(s) will appear in the List of Selected Devices. If necessary, click on the Devices EDIT button to add/remove devices from the list. When you are finished, click on the Apply button.

Deleting an AP Group

To delete a group(s), select the group(s) in the table and click on the Delete icon, then click OK at the confirmation prompt.